How do you turn the light on and off and switch modes?
A single press of the power button turns the light on. Additional presses will cycle through the three light modes (low, high, flash). Holding the power button will turn the light off.
FAQ
A single press of the power button turns the light on. Additional presses will cycle through the three light modes (low, high, flash). Holding the power button will turn the light off.
Yes, there is a built-in display with a segmented battery gauge.
Four lights = 100 - 76%
Three lights = 75 - 51%
Two lights = 50 - 26%
One light = 25 - 6%
One blinking red bar = 5% or less.
This light is rated IPX7 for water resistance and protection in water up to 1 meter (approximately 3 feet) for up to 30 minutes.
Yes. It is designed with a daytime-visible range of 900 meters.
This light charges via the included USB-C cable.
It generally takes 1.5 hours to fully charge.
Yes, this lights works with the Trek Saddle Accessory Blendr mount and several bike-specific integrated Blendr light mounts and helmet mounts.
Runtimes vary depending on the mode use.
High beam = 11 hours
Low beam = 24 hours
Day flash = 11 hours
Runtimes vary depending on the mode use.
High steady= 5 hours
Low steady = 21 hours
Day flash = 10 hours
Night flash = 24 hours
High beam = 100 lm
Low beam = 5 lm
Day flash = 100 lm
High steady= 20 lm
Low steady = 2 lm
Day flash = 35 lm
Night flash = 2 lm
Yes, the light includes an adjustable quick-connect bracket.
Ion 100 R has four modes - Day flash, Low beam, and High beam.
Flare R City has four modes - Day flash, Night flash, Low beam, and High beam.
Please recycle the light with the battery. In the US, you can find out where to do this at www.call2recycle.org.
24.5g
36.5mm L x 29.7mm W x 36mm H
No, this light does not have ANT + or Bluetooth functionality, so it can't pair with any computer, light, remote, or any wireless device.
Ion 100 R and Flare R City are Daytime Running Lights that help to make you more visible in full daylight or low light conditions. They are not intended to illuminate a dark trail or road.
Yes, turn the light on and then hold down the power button for 15 seconds.