Bontrager Line Pro 30 and Line Comp 30 Wheels FAQ

How do the Line Pro 30 MTB wheels differ from the previous generation of Line Pro 30 MTB wheels?

We know that more compliant wheels make bikes more capable of tackling tough terrain and make trails more fun, so our goal was to add compliance while maintaining impact strength.

We lowered the rim depth to 23.5mm, while adding reinforced spoke nodes and offset spoke beds resulting in 13% more radial compliance in the front wheel, and 11% in the rear wheel. Additionally, we redesigned the tire well to make tubeless setup even easier.

What is OCLV Carbon?

OCLV stands for Optimum Compaction, Low Void and features carbon fiber that’s layered in carefully calculated patterns, then compacted using heat and pressure to create the ideal carbon-to-resin ratio. This translates to a strong, lightweight, and comfortable wheelset in a wheel you can trust.

How many points of engagement do the Rapid Drive 108 hubs provide?

As the name suggests, there are 108 points of engagement on the hubs for the Line Pro 30 and Line Comp 30 wheels translating to near-instant engagement at 3.3 degrees.

What freehub driver do the Line Pro 30 and Line Comp 30 come with?

The wheels come with the SRAM XD freehub driver.

Are the Line Pro 30 wheels supported by the Carbon Care Wheel Loyalty Program?

Yes. We stand behind our carbon wheels with our Carbon Care Wheel Loyalty Program. That means if you damage your wheels in the first 2 years of ownership while riding, we have you covered with repair or replacements!

Learn more about the Carbon Care Wheel Loyalty Program here.

What is the warranty for Line Pro 30 and Line Comp 30 wheels?

Line Pro 30 and Line Comp 30 are both covered by our lifetime warranty.

What is the maximum pressure for the Line Pro 30 and Line Comp 30 wheels?

Maximum tire pressure of 50 PSI.

Are the Line wheels tubeless compatible?

Yes. Both Line Pro 30 and Line Comp 30 are tubeless ready right out of the box. The Line Pro 30 comes with a Bontrager TLR Rim Strip and TLR Valve installed. The Line Comp 30 comes with TLR Rim Tape and a TLR Valve installed.

What size tires were the Line Pro 30 and Line Comp 30 MTB wheels optimized for?

The wheels were optimized around 2.4-, 2.5-, and 2.6-inch tires.

Shop Bontrager MTB Tires

Are there any rider weight limits for the Line Pro 30 and Line Comp 30 wheels?

Line Pro 30 and Line Comp 30 wheels have no rider weight limits. Follow the weight limit of your bicycle.

Are the Line Pro 30 and Line Comp 30 wheels compatible with tire inserts?

Yes, they are compatible with tire inserts.

What length valve stems are recommended?

We recommend 50mm valve stems. If you need a replacement, check out SKU #W527257 (local availability may vary).

What other drivers are available for the Line Pro 30 wheels?

Micro Spline freehub driver (SKU #600718) and Shimano HG freehub (SKU # 552410) are both available (local availability may vary).