Skip to content

Trek BellBeats FAQ

What is the IPX rating?

BellBeats has an IP67 ingress rating for dust and water.

How much does BellBeats weigh?

Bell beats weighs 70g.

Is BellBeats Blendr compatible?

No, Bellbeats comes with an integrated universal mount and a belt clip for mounting to bike or body, but does not work with available Blendr mounts.

What is the battery capacity?

BellBeats has an integrated 650mAh rechargeable battery.

How long does the battery last?

BellBeats offers continuous music playback for 6 hours.

How long does it take to charge?

Charge time via the included USB-C cable is 4 hours with a 5VDC charging voltage.

How do I know the battery status of BellBeats?

BellBeats has a 4 bar LED battery gauge. 4 green bars is 100%, 3 green bars is 75%, 2 amber bars is 50%, 1 red bar is 25%, and 1 red flashing bar is less than 5% battery remaining.

Is BellBeats USB-C compatible?

Yes, BellBeats is USB-C compatible, and features an integrated rubber charge port cover that easily opens for access to the USB-C charging port.

How many alerts or tones does the bell come programmed with, and can they be customized?

BellBeats ships with 8 tones loaded including fun, alert, and looping tones. You can access two tones at any given time with either a short push or long push of the trigger lever. The tones are not further customizable.

How do you switch between tones?

Press and hold the Play button and bell tone Trigger to enter sound selection. Both the short press and long press tones are selected individually. Start with the short press, press the + or – buttons to scroll through available sounds, and press the play button to select the desired sound. After selecting the short press sound, BellBeats automatically enters the long press selection with the same steps to select a tone.

How does it connect or pair with a phone?

BellBeats uses Bluetooth. To pair, make sure the phone or device is in pairing mode. Turn on BellBeats to automatically enter pairing mode when turning on. BellBeats will make a sound and the LED’s will blink when a connection is made. If no connection is made within 5 minutes BellBeats will leave pairing mode.

How do you turn BellBeats on?

Press and hold the Play button for two seconds to power on and off.

How can you factory reset BellBeats?

When the unit is on, press and hold the – and + buttons for 8 seconds.